Assigning Plug-In Parameters - Native Instruments MASCHINE MIKRO MK2 Manual

To open a floating window for the plug-in:
1. Place your mouse cursor over the plug-in icon; an
2. Click anywhere in this area to open the plug-in in a separate floating window. A second
click in the area will close the plug-in window.
Hardware
To open a floating window for the plug-in:
1. Press Button 5–8 to select the Module slot in which the plug-in is loaded.
2. Press the same Button 5–8 again to open the plug-in in a separate floating window. Press
the same Button again to close the plug-in window.
4.3.3

Assigning Plug-in Parameters

The plug-in parameters offer various ways to shape each plug-in individually. Of course, you
can adjust the plug-in parameters using the plug-in's user interface. But MASCHINE also al-
lows quick and convenient access to the parameters of a plug-in by automatically organizing
them into Parameter pages and assigning them to the Knobs 1–8 under the displays. Having
the plug-in parameters on Parameter pages in MASCHINE has following benefits:
▪ You can step through the Parameter pages on your controller via the Page buttons and try
out all parameters with the 8 Knobs directly after loading a plug-in (see section
Loading a Plug-in
▪ The plug-in parameters can be automated the same way as any other parameters at the
Group and Sound levels (see section
section ↑7.1.9, Recording and Editing Automation
▪ The current state of the plug-in parameters can be saved to the Browser as preset for total
recall of the plug-in (see section
An auto-mapped Parameter page of the MASSIVE plug-in in the software.
for more info).
↑6.1.9, Recording Automation
↑4.3.4, Using VST/AU Plug-in Presets
EDIT button appears.
for the hardware and
for the software).
for more on this).
MASCHINE MIKRO MK2 - Manual - 107
Working with Sounds
Using VST/AU Plug-ins
↑4.3.1,