Native Instruments MASCHINE MIKRO MK2 Manual page 305

Parameter
Mode
Slices
(2) Tempo settings
Parameter
Auto
Man
BPM
(3) ADD and REMOVE
Element
ADD
REMOVE
(4) APPLY and Loop Dragger
Description
Here you can select either Split, Grid or Detect:
Split mode: The Sample will be sliced into equally spread Slices.
Grid mode: The Sample will be sliced according to note values.
Detect mode: The Sample will be sliced according to its transients.
Depending on the mode selection you have made (see
just the following here:
In Split mode: Slices lets you choose the amount of Slices: 4, 8, 16 or 32.
In Grid mode: Length lets you choose the length of the Slices in note values:
4th, 8th,16th or 32nd notes.
In Detect mode: Sens lets you adjust the sensitivity of the transient detection.
Higher values will cause more Slices to be detected because more transients will
be recognized, lower values will result in less Slices. This parameter should be
adjusted until all the musically significant slices are being detected in the wave-
form.
Description
If this radio button is selected, MASCHINE will calculate the tempo automatical-
ly.
If this radio button is selected, you can enter the tempo in BPM manually.
If you have selected Auto, you can choose between the tempo that MASCHINE
detected, or half or double of that tempo. If you have selected Man, you can ad-
just the tempo manually.
Description
Adds a Slice within the selected Slice according to the Slicing Mode settings.
Removes the selected Slice.
Sampling and Sample Mapping
Controlling Sampling from the Software
Mode above), you can ad-
MASCHINE MIKRO MK2 - Manual - 305