Changing The Sound's Color - Native Instruments MASCHINE MIKRO MK2 Manual

▪ If you load a Module in Module slot 1 from the Module menu (software) or Module list
(controller), the Sound slots takes the Module's name.
You can also rename Sound slots manually. Naming is only available from within the software,
but any changes will also show up on your controller.
Once you have renamed the slot manually, the automatic renaming described above is par-
tially disabled — the slot doesn't get renamed when loading another Module preset into it
nor when loading another Module in its Module slot 1.
To rename a Sound slot:
1. Double-click the desired Sound slot.
The Sound slot's name gets highlighted.
2. You can now edit the name of the Sound slot. Press [Enter] on your computer keyboard to
confirm.
If you use MASCHINE as a plug-in, some hosts will utilize the [Enter] key, as it is mapped
to some function of the host software. In this case, click anywhere else in the MASCHINE
plug-in window to confirm the name you have entered.
4.5.2

Changing the Sound's Color

You can change the color of each individual Sound in the software. To do this:
Working with Sounds
MASCHINE MIKRO MK2 - Manual - 121
Managing Sounds