Selecting A Scene - Native Instruments MASCHINE MIKRO MK2 Manual

Pattern Editor, all references to it in the Arranger will get updated accordingly. These ref-
erences are called Clips. In the Arranger, you create, delete, and edit Clips — that is, ref-
erences to your Patterns.
▪ The length of a given Scene always corresponds to the longest Pattern used in this Scene.
As a notable consequence, whatever you do in the Arranger, your Patterns stay untouched
— with one exception: When you double-click a Clip, you can enter a name that will be
saved to the referenced Pattern. See
10.1

Selecting a Scene

Hardware
1. Enter Scene mode by holding the
ing Button 1 at the same time.
The right display gives you an overview of the available Scenes, with the selected Scene
highlighted. The lit pads show the Scenes available for selection. If more than one pad is
brightly lit, these Scenes are looped.
2. Hit one of the pads to select a Scene. To get to Scenes 17–64, use Buttons 6, 7, and 8.
Software
Select the Scene by clicking on the Scene slot in the Arranger. It will now be highlighted:
►
↑7.2.1, Naming Patterns
SCENE button. You can pin the Scene mode by press-
Creating a Song using Scenes
for more on this.
MASCHINE MIKRO MK2 - Manual - 265
Selecting a Scene