Recording The Pads - Native Instruments MASCHINE MIKRO MK2 Manual

1. Press the Group button (A–H) of a Group you want to use Pad Link in.
2. Hold the PAD MODE
3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad you want to as-
sign to a Pad Link group.
4. On the left display, select the desired Pad Link group for this pad using Knob 1
GRP).
5. Set the pad to Master or Slave mode using Knob 2
6. Repeat the process with other pads to link each pad to a Pad Link group.
Releasing a Pad from a Pad Link Group
To release a pad from a Pad Link group:
1. Press the Group button of the pad you want to release from its Pad Link group.
2. Hold the PAD MODE
3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad with the Sound
you want to remove from a Pad Link group.
4. On the left display, change the Pad Link to
5. Repeat the process to remove other pads from a Pad Link group.
6.1.4

Recording the Pads

You can easily record beats with the pads:
1. Press PLAY to start the sequencer.
The PLAY button lights up.
2. Press REC to enable Record mode.
The REC button lights up.
button.
button.
OFF
(LINK MODE).
using Knob 1.
MASCHINE MIKRO MK2 - Manual - 168
Working with Patterns (Controller)
Creating Patterns
(LINK