Native Instruments MASCHINE MIKRO MK2 Manual page 136

2. In the Sound MIDI Settings window that opens, configure the MIDI settings for that
Sound (available settings are described in the table below).
3. When you are done, press
Note: if the Sound MIDI Settings are disabled (i.e., the
checked), the Sound will have its default MIDI behavior: Any incoming MIDI note will trig-
ger the Sound as long as the Sound is in focus.
Sound MIDI Settings
Status Section
Enable
Input Section
Channel
Low Note
High Note
OK to confirm or CANCEL
Description
To enable custom MIDI settings for the Sound, click this checkbox.
Choose on which MIDI Channel the Sound will receive MIDI by selecting it
in the drop-down menu.
Define the lowest note on which the Sound will respond to MIDI here.
Define the highest note on which the Sound will respond to MIDI here.
to discard your new settings.
Enable checkbox at the top is un-
MASCHINE MIKRO MK2 - Manual - 136
Working with Sounds
Using MIDI with Sounds