Controlling Sampling From The Software; Recording A Sample (Software) - Native Instruments MASCHINE MIKRO MK2 Manual

Page 2: Velocity Settings
The MAP page on the controller, page 2 of 3: velocity settings.
Parameter
LOW
HIGH
Page 3: Tune, Gain, and Pan Settings
The MAP page on the controller, page 3 of 3: tune, gain, and pan settings.
Parameter
TUNE
GAIN
PAN
11.2

Controlling Sampling from the Software

11.2.1

Recording a Sample (Software)

To record a Sample in the software, do the following:
1. Choose an empty Sound slot to record into by clicking it in the Pattern Editor.
Description
Dial Knob 1 to define the lowest velocity for the Zone.
Dial Knob 2 to define the highest velocity for the Zone.
Description
Tune control for the Zone (Knob 1).
Volume level for the Zone (Knob 2).
Panorama position for the Zone (Knob 3).
Sampling and Sample Mapping
Controlling Sampling from the Software
MASCHINE MIKRO MK2 - Manual - 292