Table of Contents
Advertisement
Following parameters are available:
Parameter
PITCH section
TUNE
FORMANT C
(Formant Correction)
SRC TIME section
MODE
AUTO DTCT
(Beat mode only)
SRC
(Beat mode only)
NEW TIME section
NEW BPM
(Beat mode only)
Description
Pitch shifting parameters.
Adjusts the detuning (pitch shifting) to be applied (in semitones). Leave this value
to
0
to leave the original pitch untouched.
Enables/disables the formant correction. Formant correction allows the pitch-shift-
ed audio to retain the timbre (or "color") of the original audio as much as possi-
ble. This is especially useful for melodic instruments.
Time stretching: parameters for the source (original) audio.
Selects from the two available time shifting modes.
BEAT: In Beat mode, the new tempo is defined relatively to the time signature (the
beats and bars) of the original audio. This can be useful if you sampled a loop
with a clearly defined rhythm (e.g., a drum loop).
FREE: In Free mode, the new tempo is defined independently from the time signa-
ture of the source. This is more suited for non-rhythmic Samples. In this mode on-
ly one parameter is available:
If
AUTO DTCT
(Auto Detection) is enabled, MASCHINE automatically detects the
tempo of the original audio.
SRC
(Source BPM) allows to define the tempo of the original audio (in BPM). This
tempo is defined in different ways according to the
If
AUTO DTCT
is enabled, you can set the length (in bars) of the original audio.
You can choose between 1, 2, and 4 bars. The number between brackets indicates
the resulting tempo (in BPM) derived from the number of bars you have set and
the computed tempo value.
If
AUTO DTCT
is disabled, you can directly define the tempo of the original audio
(in BPM).
Time stretching: parameters for the target (pitch-shifted) audio.
Defines the target tempo of the time-shifted audio (in BPM).
SPEED
(see below).
AUTO DTCT
MASCHINE MIKRO MK2 - Manual - 286
Sampling and Sample Mapping
Controlling Sampling from the Hardware
value:
Advertisement
Table of Contents
