Native Instruments MASCHINE MIKRO MK2 Manual page 312

(2) Velocity settings
These settings affect the Zone(s) selected in the Mapping area (6).
Parameter
Low Vel
High Vel
(3) Tune, Gain, and Pan settings
These settings affect the Zone(s) selected in the Mapping area (6).
Parameter
Tune
Gain
Pan
(4) Info bar
Displays the file name and the length of the Sample contained in the last selected Zone. Click
and hold the little loudspeaker icon on the left to listen to the Sample.
(5) Map menu
The Map menu provides following commands:
Command
Remove sample(s) from
map
Open containing folder
Save sample as...
(6) Mapping area
Description
Defines the lowest velocity of the selected Zone. Alternatively, you can
drag the lower border of the Zone in the Mapping area (6).
Defines the highest velocity of the selected Zone. Alternatively, you can
drag the higher border of the Zone in the Mapping area (6).
Description
Sets the tuning of the selected Zone.
Sets the gain of the selected Zone.
Sets the panorama position of the selected Zone.
Description
Removes the selected Zone(s) and the corresponding Sample(s).
Opens the folder on your hard disk containing the Sample of the last selected
Zone, providing quick access to the original file.
Saves a copy of the Sample(s) corresponding to the selected Zone(s).
Sampling and Sample Mapping
Controlling Sampling from the Software
MASCHINE MIKRO MK2 - Manual - 312