The Modules - Native Instruments MASCHINE MIKRO MK2 Manual

Each Sound of the selected Group is by default mapped to one of the 16 pads on the MA-
SCHINE hardware controller, so you can play the Sounds by pressing the pads.
4.1.1

The Modules

The content and settings of the selected Sound are displayed in the Control area (in the middle
of the software window) when the
The Control area displaying the content of the Sound ClosedHH Ektl A of the selected Sound slot 2.
Each Sound can hold up to four Modules in its four dedicated Module slots. The Modules load-
ed in a Sound will define its role and sonic characteristics. For example, in the picture above
the Control area displays the content of Module slot 1, in which a Sampler Module is loaded;
by looking at the tabs in the Control area's top row, we also see that Module slot
Flanger Module and Module slot
SCHINE internal effects).
The processing order is always from left to right (from Module slot 1 to Module slot 4).
In addition to Modules, each Sound also provides a set of global settings called Properties.
We will describe them in section
Different Types of Modules
Modules can be of different types:
SOUND tab is selected:
3 a Freq Shifter Module (both Modules are from the MA-
↑4.4, The Sound Properties.
Working with Sounds
2 holds a
MASCHINE MIKRO MK2 - Manual - 78
Sound Basics