Table of Contents
Advertisement
Quick Selecting Events and Notes
The quickest and easiest way to select events/notes is the following:
Press
SHIFT
+
SELECT
►
in Group mode) or to select all notes at that pitch (if pads are in Keyboard mode).
The selected pad lights up. While holding
add their events/notes to your selection, or press a lit pad to remove its events/notes from the
selection (the pad lights off).
For example this can be very useful to quickly quantize a few drum instruments in your kit
without affecting the rest of the kit!
Using the Select Mode
In order to make more complex selections, your controller provides you with a useful tool: the
Select mode.
To select events in your Pattern:
1.
Hold
SELECT
to enter Select mode — or press
mode.
2.
Press Button 2 (EVENTS).
You can now select notes and events using various tools: using the pads, Buttons 5–8, Knobs
1–4, and the Page buttons (left of the displays). Depending on the current Pad mode (Group
mode or Keyboard mode, see
described in the following paragraphs.
Selecting Events (Pads in Group mode)
In Group mode (the default mode of the pads), each pad represents a specific Sound.
Selecting events on the controller with the pads in Group mode.
You have following selection tools at your disposal:
+ the desired pad to select all events for that Sound (if pads are
SHIFT
+
↑6.1.2, Pad
Modes), these tools will select events differently, as
SELECT
you can press other unlit pads to
SELECT
+ Button 1 to pin the Select
MASCHINE MIKRO MK2 - Manual - 178
Working with Patterns (Controller)
Editing Patterns
Advertisement
Table of Contents
