Table of Contents
Advertisement
When you load the effect into the first Module slot, MASCHINE automatically renames the
Sound slot to the Module name. This will be of great help when routing other signals to
that send effect — see
Software
1.
Select and display the desired Sound: Click the Group slot of the Group containing the
Sound you want to use as send effect in the Arranger; click the corresponding Sound slot
in the Pattern Editor, and click the
2.
In the top right part of the Control area, click the arrow on the right of the tab of Module
slot
1
to open the Module menu, click the FX submenu, and click the desired entry in the
list (select the Plug-ins submenu near the bottom of the list if you want to load a VST/AU
plug-in).
Upon your selection the effect is loaded and its parameters are displayed in the Parame-
→
ter area. When you load an effect into the first Module slot of a Sound, MASCHINE auto-
matically configures the Sound's input to receive any signal(s) coming from other Sounds
and Groups in your Project and send them through its own Module slots — in other
terms, you now have a send effect.
You could also load an effect preset from the Browser instead of using the Module menu.
For more info on how to load effect presets, see
When you load the effect into the first Module slot, MASCHINE automatically renames the
Sound slot to the Module name. This will be of great help when routing other signals to
that send effect — see
↑9.4.2, Routing Audio to a Send Effect
SOUND
tab in the Control area.
↑4.1.7, Saving Module
↑9.4.2, Routing Audio to a Send Effect
Creating a Send Effect
below for more info.
Presets.
below for more info.
MASCHINE MIKRO MK2 - Manual - 257
Using Effects
Advertisement
Table of Contents
