Native Instruments MASCHINE MIKRO MK2 Manual page 237

The Resochord in the software.
Parameter
Pitch
Mode
Spread (String mode)
Style (Chord mode)
Chord (Chord mode)
Tune
Colour
Brightness
Feedback
Decay
Mix
The Resochord on the controller.
Description
Here you can select between the two modes of the Resochord: Chord and
String. In Chord mode, the 6 combs are tuned according to various chords.
In String mode, the 6 combs are centered around one frequency and can
be spread for an intense chorus-like effect. Depending on your selection
the other parameters in the Pitch area will change.
Allows you to define how big the difference in tuning is between combs.
You can select between different chord-styles such as minor or major.
Here you can choose from different chords to be applied to your audio sig-
nal.
It allows you to transpose the Resochord in semitones.
This is to determine the basic sound characteristic of the Resochord: high-
er values will brighten the sound by adding high frequencies.
Adjusts the amount of output signal fed back into the input.
With Decay you adjust how fast the Resochord fades out.
Mix lets you adjust the amount of the effect in relation to the dry original
audio signal.
MASCHINE MIKRO MK2 - Manual - 237
Effect Reference
Delays