Routing Page - Native Instruments MASCHINE MIKRO MK2 Manual

Setting
Sample Rate
Latency
2.5.2

Routing Page

The Routing page allows you to configure the connections between the virtual inputs/outputs of
MASCHINE and the physical inputs/outputs of your audio interface.
Description
The currently selected sample rate of your audio interface. Please restart
MASCHINE after changing the sample rate.
Mac OS X: This slider allows you to adjust the latency of your audio inter-
face in samples. Lower values result in a more immediate playing response
but are heavier on both the CPU and the audio driver, and may result in
audible clicks and pops. Larger values are easier on the CPU, but intro-
duce a larger latency (i.e., there may be a very small delay between when
you hit a pad and when you actually hear it). You should therefore experi-
ment with this setting so that it is as low as possible without overloading
your CPU or introducing any audio artifacts.
Windows: When using an ASIO driver, the Audio and MIDI Settings window
shows an ASIO Config button instead of the
ton to open the settings window of the selected ASIO driver.
Audio and MIDI Settings
Latency slider. Click this but-
MASCHINE MIKRO MK2 - Manual - 51
Basic Concepts