Native Instruments MASCHINE MIKRO MK2 Manual page 150

Controls
Main
Output
Level
Pan
Aux 1
Output
Level
Aux 2
Output
Level
If MASCHINE is running as a plug-in, the external stereo outputs Out 1–16 available in the
Output selectors of the Main,
in your host. This allows you to send individual Groups from MASCHINE to their own mixer
channels within your DAW, for example.
Page 2: Aux Mode
Page 2 of 2 from the Group's Output Properties on the controller.
Description
Defines where you want to send the main audio output of your Group. You
can choose from the 16 external stereo outputs Out 1–16.
Adjusts the overall volume level of your Group.
Defines the panoramic position of your Group in the stereo field.
The destination for Aux 1: available destinations are None (no output, de-
fault setting), Master, any other Sound (within other Groups) acting as bus-
sing point, as well as the 16 external stereo outputs Out 1–16.
Here you adjust the level of the signal that gets sent to the Aux 1 destina-
tion.
The destination for Aux 2: available destinations are None (no output, de-
fault setting), Master, any other Sound (within other Groups) acting as bus-
sing point, as well as the 16 external stereo outputs Out 1–16.
Here you adjust the level of the signal that gets sent to the Aux 2 destina-
tion.
Aux 1, and Aux 2 sections will correspond to virtual outputs
MASCHINE MIKRO MK2 - Manual - 150
Working with Groups
The Group Properties