Table of Contents
Advertisement
Displays the file name and the length of the edited Sample. Click and hold the little loud-
speaker icon on the left to listen to the Sample. When the Sample is played back, the Play-
head indicator (7) shows you the current play position within the waveform.
(5) Edit menu
The Edit menu provides several audio editing functions to process your Sample. Click the
menu and select the desired audio function. The audio function will be directly performed on
the region between the start and end points of the Sample, as defined by the
parameters (1).
Available audio functions are described in the next paragraph.
(6) Timeline
Shows the time scale in seconds. When you put the mouse cursor over the timeline, the cursor
turns into a small magnifying glass: click and drag your mouse horizontally for scrolling
through the waveform and vertically to zoom in/out.
(7) Playhead indicator
When the Sample is played back, this white vertical line shows you the current play position
within the waveform.
(8) Zoom Tool
Use this to zoom in and out of the Sample by click-dragging up (zoom in) and down (zoom
out). You can also use the Timeline (6).
Audio Functions in the Edit Menu
The audio functions will be performed on the region between the start and end points of the
Sample, as defined by the
These audio processing functions are destructive, i.e. they modify the audio material in the
Sample. However, your original Sample will not be modified: For each audio function that
you perform, a new, distinct copy of the Sample will be saved!
The Edit menu (5) provides following audio processing functions:
Start
and
End
parameters (1).
Sampling and Sample Mapping
Controlling Sampling from the Software
Start
and
MASCHINE MIKRO MK2 - Manual - 299
End
Advertisement
Table of Contents
