Controlling Plug-In Parameters - Native Instruments Maschine Jam Manual

3. Press and hold the
4. Put your finger on the Smart Strip and slide it upwards to increase the effect, or slide it
downwards to decrease the effect.
5. Release the AUTO
Once you release the
→
Strip are automatically replicated during playback.
To delete automation press
8.3

Controlling Plug-in Parameters

The Control button enables you to control the parameters from both internal and external plug-
in parameters visible in the MASCHINE software Control area. Available on every channel
(Sounds, Groups, and Master), the Control button provides access to sets of parameters that
are very useful for quickly adjusting parameters while playing live or recording.
Adjusting Plug-in Parameter Values
To adjust parameters of a plug-in using your controller:
1. Press and hold the
2. To adjust a parameters of a plug-in on the Master channel press the
Group channel press the Group button (A-H), and for the Sound channel press a Sound
button (1-16).
⇨
The LED meters on the Smart Strips adjust to display the current value of the selected
page of parameters. The Smart Strips can be used to adjust the parameter values.
3. Press the left or right page buttons to select another page of parameters if they are availa-
ble.
The LED meters on the Smart Strips update to display the next page of parameters, and
→
the Smart Strips can be used to adjust the parameters.
AUTO button.
button once you are satisfied with the sound.
AUTO button, the changes you made to the effect using the Smart
SHIFT + ATUO + CLEAR.
CONTROL button.
Mixing your Project
Controlling Plug-in Parameters
MST button, for a
MASCHINE JAM - Manual - 139