Native Instruments MASCHINE MIKRO MK2 Manual page 226

The Phaser in the software.
Parameter
Freq
Center
Modulation
Amount
Source
Speed (LFO)
Speed (LFO Sync)
Shape (Envelope)
Stereo
Feedback
Amount
8Pole
Output
Mix
Description
This defines the center frequency of the Phaser.
This defines how much the Phaser gets modulated by the modulation
source.
Here you can select the modulation source of the Phaser: available options
are LFO, LFO Sync, and Envelope. Depending on your selection, the pa-
rameter to the right will change.
Defines the speed of the LFO in a range from 0.03 Hz up to 8 Hz.
Defines the speed of the LFO in note values from 16/1 (one cycle every 16
bars) up to 1/16 note.
Change the shape of the envelope here.
This parameter widens the stereo field of the effect.
Adjusts the amount of output signal fed back into the input.
Activating this causes the Phaser to use the 8Pole mode, resulting in a
more intense phasing effect.
Mix lets you adjust the amount of the effect in relation to the dry original
audio signal.
MASCHINE MIKRO MK2 - Manual - 226
Effect Reference
Modulation Effects