Managing Groups; Naming Group Slots - Native Instruments MASCHINE MIKRO MK2 Manual

Page 2 of 2 from the Group's Output Properties in the software.
Controls
Aux Mode
Pre Mix 1
Pre Mix 2
5.2

Managing Groups

This section describes the global editing functions available for Groups and Group slots.
5.2.1

Naming Group Slots

By default, Group slots are named
a Group slot, the slot automatically takes the Group's name.
You can also rename Group slots manually. Naming is only available from within the software,
but any changes will also show up on your controller.
Group renaming is performed like Sound renaming:
1. Double-click the desired Group slot.
The Group slot's name gets highlighted.
Description
If this is enabled, the Group will be fed into Aux 1 before the
Pan settings of the Main section (on page 1) are applied.
If this is enabled, the Group will be fed into Aux 2 before the
Pan settings of the Main section (on page 1) are applied.
Group A–H. If you load a Group (e.g. from the Browser) into
Working with Groups
Level and
Level and
MASCHINE MIKRO MK2 - Manual - 151
Managing Groups