Duplicating, Clearing, And Removing Scene Slots - Native Instruments MASCHINE MIKRO MK2 Manual

2. While holding the mouse button, drag your mouse horizontally toward the desired loca-
tion.
As the mouse cursor moves, an insertion line appears at the potential places where you
can drop the Scene slot.
3. When the insertion line appears at the desired location, release the mouse button.
The Scene slot takes its new place. On your controller, you can now select this Scene via
→
the pad corresponding to its new location.
10.3.4

Duplicating, Clearing, and Removing Scene Slots

Duplicating a Scene slot will insert a new Scene slot next to it containing the exact same
Scene and settings (name, color). The following Scene slots will shift one step to the right.
Removing a Scene slot will simply delete the slot and its content. The following Scene slots
will shift one step to the left.
Clearing a Scene slot will delete its content, leaving the slot empty.
You cannot clear Scene slots using your controller.
Hardware
The commands DUPL (Button 3) and REMOVE (Button 4) on the controller.
1. Hold SCENE to enter Scene mode (you can pin it by pressing Button 1 at the same time).
2. Press the pad corresponding to the Scene slot you want to duplicate or remove.
Creating a Song using Scenes
Manipulating Scenes
MASCHINE MIKRO MK2 - Manual - 270