Table of Contents
Advertisement
10. When you have found the effect you want to use, press Button 8 to load it. You can also
use buttons 5 and 6 to step through the list and load each effect directly.
11. Switch back to Control mode by pressing
again).
Now you can edit the effect parameters using Knobs 1–8 and the Page buttons.
→
Loading a Module will replace any Module previously loaded in the Module slot.
For more information on editing effect parameters, please read
ule
Parameters.
If you created a nice effect setting, you can put it to further use by saving it as a Module
preset. Please read
For additional, specific information on VST/AU plug-ins, please read
ity Destination and Modwheel
Software
1.
If you want to apply the effect to the Master (to process the audio of the whole Project),
click the
MASTER
↑4.1.5, Bypassing Module Slots
Destination.
tab in the Control area.
Applying Effects to a Sound, a Group or the Master
CONTROL
(or by pressing
↑4.1.4, Adjusting the Mod-
for more details.
↑4.2.6, Page 6: Veloc-
MASCHINE MIKRO MK2 - Manual - 246
Using Effects
SHIFT
+
BROWSE
Advertisement
Table of Contents
