Native Instruments MASCHINE MIKRO MK2 Manual page 248

4. In the top right part of the Control area, click the arrow on the right of the tab of the de-
sired Module slot 1–4
The Module menu opens and shows a list of all available effects.
5. Click the desired entry in the list. If you have VST/AU effect plug-ins installed you may
also load them from the menu by selecting the Plug-ins submenu near the bottom of the
list.
Upon your selection the effect is loaded and its parameters are displayed in the Parame-
→
ter area below (in the example underneath we selected the Phaser effect in the Module
menu).
Loading a Module will replace any Module previously loaded in the Module slot.
For more information on editing effect parameters, please read
ule Parameters.
If you created a nice effect setting, you can put it to further use by saving it as a Module
preset. Please read
(in the example underneath we choose Module slot
↑4.1.5, Bypassing Module Slots
Applying Effects to a Sound, a Group or the Master
2
↑4.1.4, Adjusting the Mod-
for more details.
MASCHINE MIKRO MK2 - Manual - 248
Using Effects
of a Sound).