Table of Contents
Advertisement
2.
In the Sound MIDI Batch Setup window that opens, configure the MIDI settings for all
Sounds of that Group (available settings are described in the table below).
3.
When you are done, press
The Sound MIDI Batch Setup window provides following settings:
Mapping Mode
Restore Defaults
Sounds to MIDI Channels
Sounds to MIDI Notes
MIDI Channel
Root Note
APPLY
to confirm or
CANCEL
Description
Select this radio button to restore the MIDI mapping to its default state. In
the default state, only the selected Sound will receive MIDI notes.
Select this radio button to have Sounds mapped to individual MIDI chan-
nels. This is useful if you want to play a Sound in a tonal way.
Select this radio button to have Sounds mapped to MIDI notes, starting
with the root note (see below). This is useful for drum kits.
Select a MIDI channel here if you have selected the Sounds to MIDI Notes
option.
Choose a root note here if you have selected the Sounds to MIDI Notes op-
tion. This defines the note that will trigger the Sound in Sound slot 1. The
other 15 Sounds will be triggered by the following 15 notes on the key-
board.
to discard your new settings.
MASCHINE MIKRO MK2 - Manual - 134
Working with Sounds
Using MIDI with Sounds
Advertisement
Table of Contents
