Table of Contents
Advertisement
Page 1
Page 1 of the Beat Delay in the software.
Page 1 – Parameter
Delay
Time
Offset
Feedback
Amount
Crossover
Color
Split
Output
Stereo
Mix
Description
The
Time
parameter defines the delay length in note values. The available
values depend on the unit defined by the
below). They range from half a unit to 16 units.
This parameter is used to shift the start of the delay in relation to the tem-
po.
Adjusts the amount of output signal fed back into the input. Higher values
produce more copies of the signal and longer decays.
Allows for panning the feedback signal rhythmically in the stereo field.
Defines the basic frequency of the feedback circuit: lower values result in
a deeper sound, whereas higher values brighten the sound.
Controls the difference in frequency between left and right channel. At full
left, this control is disabled.
This parameter widens the stereo field of the effect. Values go from
-100.0 % to 100 % — negative values inverse the stereo field of the ef-
fect.
Mix
lets you adjust the amount of the effect in relation to the dry original
audio signal.
Unit
parameter on page 2 (see
MASCHINE MIKRO MK2 - Manual - 232
Effect Reference
Delays
Advertisement
Table of Contents
