Native Instruments MASCHINE MIKRO MK2 Manual page 119

Page 1 of 2 from the Sound's Output Properties in the software.
Controls
Main Section
Output
Level
Pan
Aux 1 Section
Output
Level
Aux 2 Section
Output
Level
If MASCHINE is running as a plug-in, the external stereo outputs Out 1–16 available in the
Output selectors of the Main,
in your host. This allows you to send individual Sounds from MASCHINE to their own mixer
channels within your DAW, for example.
Description
This is used to define where you want to send the main audio output of
your Sound. Available options are None (no output), Master, Group (default
setting), any other Sound within the Project acting as bussing point, as
well as the 16 external stereo outputs Out 1–16.
Here you adjust the overall volume level of your Sound.
Defines the pan position of your Sound in the stereo field.
The destination for Aux 1: available destinations are None (no output, this
is the default setting), Master, Group, any other Sound within the Project
acting as bussing point, as well as the 16 external stereo outputs Out 1–
16.
Here you adjust the level of the signal that gets sent to the Aux 1 destina-
tion.
The destination for Aux 2: available destinations are None (no output, de-
fault setting), Master, Group, any other Sound within the Project acting as
bussing point, as well as the 16 external stereo outputs Out 1–16.
Here you adjust the level of the signal that gets sent to the Aux 2 destina-
tion.
Aux 1, and Aux 2 sections will correspond to virtual outputs
MASCHINE MIKRO MK2 - Manual - 119
Working with Sounds
The Sound Properties