Table of Contents
Advertisement
1.
Select the Sound to be removed from the Pad Link group, right-click and then select Off
from the Pad Link submenu ([Ctrl]+click on Mac OS X).
2.
Repeat the process to remove each pad from a Pad Link group.
Setting up a Pad as Master or Slave in a Pad Link Group
By default, a Sound is automatically set to Master when added to a Pad Link group. This
means that hitting its pad will also trigger all other Sounds of that Pad Link group.
To set the status of a Sound from Master to Slave:
1.
In the Arranger, select the Group containing the Sound you want to assign as Slave.
2.
In the Pattern Editor, right-click ([Ctrl]-click on Mac OS X) the Sound slot containing the
Sound you want to assign as Slave.
Working with Patterns (Software)
MASCHINE MIKRO MK2 - Manual - 202
The Pattern Editor
Advertisement
Table of Contents
