Preferences - Defaults Page - Native Instruments MASCHINE MIKRO MK2 Manual

Setting
Sync Offset Slave
Input Channel
2.4.2 Preferences – Defaults Page
The Defaults page allows you to define a few default settings that will be used for every new
Project. To display the
Description
Depending on variables such as the speed of your CPU, your audio inter-
face, your MIDI interface and the
and MIDI Settings window (see
experience a lack of synchronization between MASCHINE and the external
MIDI Master. To compensate, you can adjust this
in milliseconds. An easy way to do that is to play a 4/4 kick drum pattern
or a metronome sound on both MASCHINE (see chapter
Metronome and the Count-in
external MIDI Master and mix them together moving the slider until they
are played at exactly the same time. As soon as you can hear a flanger-like
effect, you know you are close to the correct Sync Offset Slave value. Keep
on adjusting the Sync Offset Slave
flanging effect nor two separate signals.
Use this to select the MIDI channel you want MASCHINE to receive MIDI
messages on. This can be used to limit MIDI input sent by the external
sync master device. The Omni setting will allow the MASCHINE software to
receive messages on all 16 channels at one.
Defaults page click the
Latency value you selected in the Audio
↑2.5, Audio and MIDI
on how to activate the metronome) and the
control until you can neither hear the
Defaults tab on the left.
MASCHINE MIKRO MK2 - Manual - 37
Basic Concepts
Settings), you may
Sync Offset Slave value
↑6.1.5, Using the
Preferences