Table of Contents
Advertisement
(1) Start and end points of the Sample
Adjust the start and end points of the Sample by either dragging the small white icons labeled
S
(for Start) and
E
(for End) left and right using the mouse, or by adjusting the
parameters here.
The start and end point defined here will also be used when processing the audio of the
Sample! See below for more info.
If you defined a loop in the Sample (see below), the loop will always stay within the region
defined by the start and end points of the Sample. Therefore, when moving the Sample's
start and end points closer to each other, keep in mind that it might also shrink the loop!
(2) Loop settings
Here you can define a loop by clicking the
loop, the playback is looped as long as the note is held. This can be useful to loop either a
whole Sample or part of it, e.g., to simulate a longer tone. Note: this technique requires that
you choose either AHD or ADSR as the Amplitude Envelope in the Sampler's Parameter pages
(see
↑4.2.1, Page 1: Voice Settings and
via the
Start
and
End
parameters. Alternatively you can also adjust them by dragging the bor-
ders of the loop, and move the entire loop by dragging its title bar.
blend a little of the material near the loop start and end points in order to get a smoother, less
abrupt loop. This is particularly helpful if the loop is inducing any clicks.
By moving the loop's start and end points closer to each other you can shrink the loop to
very small values on-the-fly, thereby creating very interesting glitch effects in a live situa-
tion.
(3) Envelope settings
This amplitude envelope can be used to get rid of clicks after slicing; you can either apply it to
the whole Sample or to individual selected Slices.
Parameter
Attack
Decay
(4) Info bar
LOOP
Engine). The loop's start and end points can be edited
Description
The
Attack
determines how quickly the Sample/Slice reaches full volume after
being triggered.
Decay
is used to adjust how fast the Sample/Slice dies down.
button. When the play position reaches the
Crossfade
MASCHINE MIKRO MK2 - Manual - 298
Sampling and Sample Mapping
Controlling Sampling from the Software
Start
and
End
allows you to
Advertisement
Table of Contents
