Playing With The Pads - Native Instruments MASCHINE STUDIO Getting Started

8. Now press Button 7 above the displays so that
must be off — we'll get back to this later).
9. Press the jog wheel or Button 8 (above the displays) to load the selected entry.
The drum kit is loaded into the Group A.
→
For the last step, let's leave the Browser and get back to the default Control mode of your con-
troller:
Press the lit BROWSE
►
That's it! You just loaded a drum kit into a Group. It is now ready to be played from the pads,
as we will see in the next section.
The process of loading from the Browser is the same for all kinds of objects: In the
Browser, after choosing the desired object, you choose between factory and user con-
tent, you optionally select a particular product (or product category), the desired con-
tent, type, and subtype, then you scroll through the result list and select an object for
loading.
2.2

Playing with the Pads

As soon as a Group is loaded (here the EK-TL A Kit) and the corresponding Group slot selected
(here Group slot A), this Group can be played from the pads on your controller. Each pad trig-
gers one of the Sounds included in the Group.
button to leave the Browser (the button is unlit).
+PATTERNS is deselected (the Button
MASCHINE STUDIO - Getting Started - 24
First Steps
Playing with the Pads