Komplete Audio 6 In A Recording Setup - Native Instruments Komplete Audio 6 Manual

1. Plug the 1/4" TRS jack of your headphones into the PHONES socket on the KOMPLETE
AUDIO 6's front panel. Turn the Headphone Volume Control knob (VOLUME) of the KOM-
PLETE AUDIO 6 to the left-end stop to set the volume to minimum.
2. Start the playback of an audio file on your computer.
3. Gradually turn the Headphone Volume Control knob (VOLUME) of the KOMPLETE AU-
DIO 6 to the right until you reach a good listening level.
6.3

KOMPLETE AUDIO 6 in a Recording Setup

The following instructions will assist you in using the KOMPLETE AUDIO 6 in a recording sit-
uation for capturing audio to your computer, and monitoring the input and result over your
speakers or headphones. In most cases, you will use a third party DAW (digital audio worksta-
tion) software or another audio recording and editing software for recording voice or instru-
ments. For instructions on how to configure audio and MIDI routing and recording, please refer
to your software's documentation.
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
KOMPLETE AUDIO 6 in a Recording Setup
KOMPLETE AUDIO 6 - Manual - 36