Releasing A Pad From A Pad Link Group; Recording The Pads - Native Instruments Groove production studio Manual

3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad you want to as-
sign to a Pad Link group.
4. The name of the Sound will appear in the right display.
5. On the left display, change the Pad Link in the LINK GRP menu to the desired group us-
ing Knob 1.
6. Set the Pad Link Group (LINK MODE) to Master or Slave mode for this pad using Knob 2
7. Repeat the process to link each pad to a Pad Link group.
6.1.4

Releasing a Pad from a Pad Link Group

To release a pad from a Pad Link group:
1. Press the Group button of the pad you want to release from the Pad Link group.
2. Press the PAD MODE button.
3. Deselect KEYBD (Keyboard) if it is already selected, then press the pad with the sound
you want to remove from a Pad Link group. The name of the Sound will appear in the
right display.
4. On the left display, change the Pad Link to OFF using Knob 1.
5. Repeat the process to remove other pads from a Pad Link group.
6.1.5

Recording the Pads

You can easily record beats with the pads: press PLAY, then
Now hit the pads you want to record and listen to what happens. Each hit will create an event
in the Pattern editor, the event length depend on how long you hold the pad.
Working with Patterns (Hardware)
RECORD to enable Record mode.
MASCHINE - Manual - 113
Creating Patterns