Connection Technology; Power Supply; Table 7 Connection Technology; Table 8 Digital Output - WAGO 765-1503/100-000 Product Manual

Properties

4.4.3 Connection Technology

Property
Power connection
ETHERNET connector
Digital outputs
Tightening torque
Digital Output
Property
Output voltage
Current
Residual current
Circuit
Voltage drop through high-side path
Self-protection
Maximum capacitive load
Maximum inductive load
Indicators
Diagnostics
Parameters
Maximum total load current (sum of all currents of con-
nections X01–X08)

4.4.4 Power Supply

Parameters
Supply voltage, 1L, 2L
Undervoltage warning, 2L
Overvoltage warning, 2L
Module current consumption
18 Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Table 7: Connection technology
Value
PWR IN: M12 L-coded, 5-pin, plug
PWR OUT: M12 L-coded, 5-pin, socket
2 × M12, D-coded, socket, 4-pin
8 × M12, A-coded, socket, 5-pin
M12: 1.0 Nm
Value Value (per UL)
24 VDC, 2L powered
Normal operation: max. 2.0 A per channel
Overload operation: max. 2.4 A per channel, per
IEC 61131-2
Less than 1 mA
High-side driver
The digital output is not resistant to feedback.
The input voltage must not exceed the supply voltage.
Less than 250 mV
Overcurrent, overload, overtemperature and overvolt-
age
100 μF parallel to 12 Ω; 10 Hz
1.15 H / 2 A; 0.2 Hz; DC13 1.15 H / 2 A; 1 Hz; DC13;
Pilot Duty
On/off status LED
Events: overcurrent, overload, overtemperature and
overvoltage
Value Value (per UL)
15.7 A 11.7 A
Value Value (per UL)
24 VDC, –25 %/+30 % 24 VDC, –25 %/+20 %
(18 VDC ... 31.2 VDC) (18 VDC ... 28.8 VDC)
Voltages above 34 V can permanently damage the de-
vice.
Voltages below approx. 11 V lead to device reset.
18.0 V (± 5 % at 25 °C) message on
18.3 V (± 5 % at 25 °C) message off
30.0 V (± 5 % at 25 °C) message on
29.7 V (± 5 % at 25 °C) message off
1L: 130 mA (at 24 VDC)
2L: 4 mA (at 24 VDC)
765-1503/100-000
Table 8: Digital Output
Table 9: Total Load
Table 10: Power Supply