INIM Electronics Prime Programming Manual page 82

Buttons for the addition of a new map in the last position on the map tree or for the deletion of the last map on
the map tree.
Button for the insertion or overwriting of the background image of the current map.
The name of the current image file is indicated in the lower section.
The selection of several icons by means of these buttons will allow you to create their alignment.
The selection of several icons, by means of these buttons,will allow you to modify their size and apply the
dimensions of the first icon selected (width, height or both).
Not available
Button to read the configured maps from the keypad or from the PrimeLAN so that they can be modified.
Button to write on the keypad or on the PrimeLAN the newly configured or modified maps after a reading.
Section
Height, Width, Posi-
tion X and Y
Size and position
Control panel Field for the selection of the part of the intrusion control system the icon refers to.
Field for the selection of the map the link refers to.
Map link
You can indicate the home page for the web interface.
Web cam
jpeg, m-jpeg
Section containing the icons which replace the current icons in the event of status
change of the represented object.
For Alien keypad maps, it is possible to indicate the strings that will appear (when
the occurrence requires) below the current string, indicated previously mentioned.
Images
Command selection
window
Command with
authorization
request
Switch/Invert
Options
Immediate com-
View status
82
Table 20-1: Map configuration buttons
Table 20-2: Map object settings
Number fields for the dimensions of the object icon and its
position on the map.
String Field for the string that appears over the icon.
Button for the definition of the colour of the string.
URL
Configuration parameters for the webcam.
Button to select the image that will replace the default image.
Button for the deletion of the selected image.
Button for the definition of the colour of the string.
Button to reset the factory default images
If enabled, touching the icon on the map will open a window
on the display for command selection.
If enabled, the keypad will request user-code entry before
activating the command associated with the icon.
If enabled, touching the icon on the map will immediately
switch/invert the status of the object it represents.
The "Partition status" object requires further indications
relating to the arming type which is to be switched to Away
status (totally disarmed).
If enabled, touching the icon on the map will almost
immediately activate the command.
mand The command can be selected from the drop-down menu
which appears.
If enabled, this option will allow you to view on the display
status changes on the object by means of changes on the
icon, in accordance with the configuration selected in the
Image section.
Button to reset the factory default settings.
The selection of an icon, by means of these buttons,
will allow you to resize and reposition the icon so that
it occupies a quarter of the image.
Parameter
Centrali anti-intrusione
Note
For Alien only
Zone, partition, output,
scenario, keypad
For the web interface
only.
For the web interface
only.
For Alien only
For Alien only.
The commands
implement a status
change on the object.
The type of status
depends on the type of
object:
• Arming type - for a
"Partition status"
object
• Activation/
Enablement status -
for a "Zone" object
• Activation/
Enablement status -
for an "Output" object
• Activation/
Enablement status -
for a "Scenario"
object
Graphic map configuration