Table of Contents
Advertisement
9
Chapter
Via software
Via keypad
9-1
Via software
Via keypad
Via Alien
46
Programming user codes
Programming of the user codes involves both the authorizations of the user the code is
associated with, and the code itself with its parameters (hierarchical level, PIN, etc.).
Click-on the Codes button on the menu on the left, the "Programming" section will show a list
of all the available user codes and their parameters. Selecting one of these items allows you
to set the parameters of the single code by clicking on the
Type-in Code (Installer) , PROGRAMMING Codes
This section allows you to program the various options of the selected user code.
Change user PIN
The user code PINs must be numeric and comprise 4 to 6 digits.
In order to be EN50131 compliant, all PINs must have 6 figures.
The PIN of user code n. 1 is "0001" at default. The PINs of the successive user codes are
"0002", "0003", etc. up to "0050" for the Prime060S and Prime060L control panel models and
"0100" for Prime120L and Prime240L.
Click-on the Codes button on the menu on the left, the "Programming" section will show the
"Change User PIN" subsection where you can change the PIN of the selected code.
The new Code PIN must created in the "New PIN" programming field in two different ways:
• Old PIN - this method allows you to substitute the old code PIN (to be entered in the
upper edit field) with a new PIN (to be entered in the lower edit field).
• Master or Manager User PIN - this method, using a Master or Manager user PIN (to be
entered in the upper edit field) allows you to substitute the old code PIN with a new one (to
be entered in the lower edit field on the right).
Changes will be valid only after the Change PIN button has been pressed.
Type-in Code (User), Change PIN
This section allows you to change the User Code PIN used for access and also the PINs of all
other users with a lower rank in the system hierarchy.
1. Using keys
and
2. Type-in the new PIN (4, 5 or 6 digits) using keys
3. Type-in the new PIN again using keys
Type in Code (Installer), PROGRAMMING Factory settings , Only PIN default
This section will allow you to reset all PINs of the user codes to default.
Access the "Settings" section, enter a valid user code, go to the"Date/Time - Change PIN -
Change tel. num." section, then select "Change PIN".
Select the code you desire from those available on the list. The next step is to change the
code using the buttons on the touch screen then tap OK to confirm.
select the user code you want to change.
, ...,
Centrali anti-intrusione
button.
, ...,
then press OK.
then press OK to save.
Programming user codes
Advertisement
Table of Contents
