Table of Contents
Advertisement
Programming manual
Programming from the Control panel
Installer code
The installer code allows the installer to access the PROGRAMMING phase of the Prime
system. In fact, the system will request the PIN before allowing any programming from a
keypad via the installer menu or before allowing reading or writing operations from the Prime/
STUDIO software, that is, if it has not already been entered in the appropriate field.
The installer can set 2 installer codes (one personal and another) exclusively by accessing the
installer menu via a keypad:
Type-in a valid code (Installer) , PROGRAMMING Installer code .
For security reasons, you must change the PIN of the
ChangeInst. PIN
primary installer code (type-in twice).
1
The PIN is "9999" at default.
For security reasons, you must change the PIN of the
ChangeInst. PIN
secondary installer code (type-in twice).
2
The PIN is "9998" at default.
Use keys
Inst.code 2
sections of the installer menu the secondary installer
code can access.
User code PINs must comprise 4, 5 or 6 digits.
In this section, the secondary installer code can access Inst.CodePIN2 section only.
Any reading operations from the system or writing of software solutions on the Prime system
will be executed only after the installer code has been correctly entered.
This option is made available by clicking on the Panel parameters button in the section on
the left and accessing the "Programming - Installer code" section on the right.
Prime control panel
Control panel
Edit field for the description of the control panel (max
description
50 alphanumeric characters).
Section where it is possible to view the univocal serial
Serial number
number of the control panel.
Programming from the Control panel
Table 4-1: Installer code parameters
Parameter
and
to enable/disable the
Table 4-2: Control panel definition
Parameter
Installer menu section
Installer Code
Software section
Control panel
parameters
4
Chapter
4-1
Via keypad
Note
Via software
4-2
Installer menu section
Not available
Other parameters, Seri-
al number
25
Advertisement
Table of Contents
