Key Parameters - INIM Electronics Prime Programming Manual

10-2
Via software
Via keypad
Description This is an editable field for the key name/description.
This section allows you to establish which partitions
Partitions
the key can control.
This section allows you to associate a timer with the
Timers key in order to filter the operability of the key on a
time basis.
In this section it is possible to set the four shortcuts
(with any related parameter) that the key can activate
at a reader.
Each shortcut is associated with the lighting-up of a
Shortcuts
specific reader LED:
• F1 - red LED
• F2 - blue LED
• F3 - green LED
• F4 - yellow LED
Patrol The key will be a "Patrol" key.
The key will be able to block outputs associated with
Maintenance alarm/tamper events for the time that it is held in the
vicinity of a reader.
This option indicates whether the previously enrolled
Wireless
key is a wireless key or not.
If a key is held in the vicinity of a reader, only the key
Use key short-
shortcuts will be indicated and not the reader
cuts only
shortcuts.
Total
If a key is held in the vicinity of a reader when some parti-
disarming tions are armed, the Disarm option will be inhibited (all LEDs
disabled
A key is available that allows direct access to the
Valid key programming section of the access to the system
event via a valid key.
50

Key parameters

Click-on the Keys button on the menu on the left, the "Programming" section will show a list
of all the available keys and their parameters. By selecting one of these items it is possible to
set the parameters of the single key by clicking on the
Type-in Code (Installer) , PROGRAMMING Keys, "key", Key parameters
This section allows you to program the various options of the selected key.
Table 10-1: Parameters for single key
Parameter
Off).
The shortcut associated with the key can be one of the following types:
- None
- Arm/Disarm
- Stop alarms
- Clear call queue
- Delete memory
- Activate output
- Deactivate output
- Overtime
- Teleservice request
- Voice guide
- Panic
If a digital key is held in the vicinity of a reader, the LEDs will run through a series of visual
signals with the following meanings:
button.
Software section Installer menu section
Keys, selected key
Keys, "key", Key param-
eters
Keys, selected key,
Keys, "key", Change
Options
key, Options,
Keys, selected key
Events, Valid key
Centrali anti-intrusione
Use keyShortcuts
DisarmNotAllowed
Programming keys