Table of Contents
Advertisement
Programming manual
The Prime provides a programming section where you can record and play all the voice
messages.
The Table in the Appendix shows all the pre-recorded messages provided by the
SmartLogos30M voice board (Appendix D, Voice messages).
Click-on the Voice messages button on the menu on the left, in the "Programming" section
you can access to:
• Messages list, this section is where all the available voice messages and their parameters
are listed.
The "Message category" box at the top implements a filter on the display of messages,
depending on the category it belongs to.
Selecting one of these items will allow you to set up the single message by clicking on the
button or listen to it by means of the relative button
• Voice board maintenance, section for formatting the SmartLogos30M voice board.
The menu bar of these sections has the following buttons:
Button
Import
Keys to import/export the voice message programming
Export
Button to apply the text to speech setting to the selected messages.
Execute Text
The texts entered in the Text to speech section will be converted into audio files
to speech
and associated with all the messages. selected in the table.
Button that opens a window where you can change the
Configure
Text to speech
settings
Invert selec-
Button to invert the selection of the messages
tion
Button to delete the selected messages
Delete
Type-in Code (Installer), PROGRAMMING Messages
This programming field will allow you to select the single message. Afterwards it will possible
to listen to, record or delete the recording.
Voice messages
Voice messages
Table 14-1: Voice messages, menu bar
.
Function
text to speech
14
Chapter
Via software
Via keypad
69
Advertisement
Table of Contents
