Table of Contents
Advertisement
8
Chapter
Note
Via software
Via keypad
Note
44
Programming timers
Each timer can be programmed to manage:
• the assigned partitions of the codes and keypads that have access to the programming
process of the timers via the user menu
• two scheduled activation times ("ON") for each day of the week.
• two scheduled deactivation times ("OFF") for each day of the week.
• Up to 15 exceptions
A timer can be associated with:
• a Partition - if a timer is associated with a partition on which automatic-arming operations
are enabled (refer to paragraph 5-5 Activations in the User's Manual), the partition will arm
when the timer activates and disarm when the timer deactivates.
• a Code - if the timer is enabled, the entered code will be authorized to operate only during
the period the timer is activated.
• aKey - if the timer is enabled, the key will be authorized to operate only during the period
the timer is activated.
The timers must be enabled/disabled by the user (refer to paragraph 5-5 Activations in the User's
manual).
exiting the programming session all the timers will be automatically re-enabled, therefore, if the user
previously disabled any of the timers, then these must be re-enabled.
Click-on the Outputs button on the menu on the left, the "Programming" section will show a
list of all the available timers and their parameters. Selecting one of these items allows you to
set the parameters of the single timer by clicking on the
The software program allows you to set up 15 setting exceptions for each timer. Each
exception allows you to define an interval period (of even one day) within which you can set
an activation time and a deactivation time valid for all the days of the interval. The system
does not accept intervals which go over the end of the year. Therefore, it is impossible to
program an interval such as 12th December to 5th January. In such situations, you must
program 2 "timer exceptions", one from 12th to 31st December and the other from the 1st to
5th January, both with the same On and Off settings.
The exceptions have priority over the days of the week. For example, If a "timer exception",
let's say 1st May, falls on a Tuesday the settings programmed for 1st May will be applied.
Type-in Code (Installer PIN) , PROGRAMMING Timers
This section allows you to program the various options of the selected timer.
The exceptions cannot be programmed via keypad.
Centrali anti-intrusione
button.
Programming timers
On
Advertisement
Table of Contents
