INIM Electronics Prime Programming Manual page 21

Programming manual
SMS Commands
The "Programming - SMS Commands" section allows you to program up to 30 SMS-activated
commands.
Double clicking on the line of a command opens a window where you can program the
respective parameters.
Action This identifies the number of the command in the table displayed.
SMS text This is the identification string to be included in the SMS command.
This field allows you to select one of the following shortcuts that the control
panel can activate:
•
•
•
•
Shortcuts •
•
•
•
•
•
•
Shortcut parameter Selection menu for the parameter relating to the shortcut.
Selection menu for the shortcut which is to be activated after the one selected
Shortcut 2
above.
Shortcut 2 parameter As per "Shortcut parameter" but valid for the "Shortcut 2" command.
Identifies the type of command feedback:
•
•
Confirm
Feedback, whether by means of an SMS message or ring, will be provided only
when the number of the telephone where the command was entered is known.
Hidden numbers will not receive any kind of confirmation.
•
Users who wish to activate a command via SMS text must enter the command details as
follows:
where:
• <xxxxxx> stands for the PIN of a control panel user
• a blank space must be keyed in after PIN entry
• <SMS Text> which is the command identifier, as previously described
If you want the control panel to activate "Scenario 3: Switch On the perimeter lights and
confirm the operation via SMS text." For an operation of this type, proceed as follows:
1. "SMS Text" - choose the desired description, for example "Night mode"
2. "Shortcut" - select the "Arm/Disarm" shortcut
3. "Shortcut option": "Scenario 3"
4. "Shortcut 2" - select the "Activate output" shortcut
5. "Shortcut option 2" - output associated with the perimeter lights
6. "Confirm" - SMS
When a user keys in the following SMS text on a mobile (cellular) phone:
where "123456" stands for the User's PIN and this message is sent to the number of the SIM
card of the Nexus, the control panel will carry out the requested operations and will send an
SMS message of confirmation to the mobile phone of the caller who dispatched the command.
Commands are predefined by default but can be changed by the installer:
• "CONNECT" for a request for remote assistance via SMS text (future use).
• "CREDIT" - for balance inquiries relating to the SIM card of the Nexus, the user will
receive an SMS text indicating the remaining credit.
Programming peripherals
Table 3-11: SMS command parameters
Parameter
Arm/Disarm
Stop alarms
Clear call queue
Delete memory
Activate output
Deactivate output
Inhibit (bypass) control panel zones
Activate (unbypass) control panel zones
Nexus status
Credit inquiry
GPRS client
SMS - feedback will be provided by an SMS text to the telephone number of
the caller (command dispatcher).
Ring - feedback will be provided on the telephone of the caller (command
dispatcher). Positive outcome will be indicated by a "ring"; negative
outcome by "silence".
Buzzer - feedback is provided by an audible signal on the Nexus buzzer.
Positive outcome is indicated by a three short audible signals; negative
outcome is indicated by five long audible signals.
<xxxxxx> <SMS Text>
123456 Night mode
Night mode: command done!
3-5-1
Software section
SMS Commands
COMMAND USING
SMS TEXT
EXAMPLE
DEFAULT
COMMANDS
21