Table of Contents
Advertisement
Programming manual
Access to user menu
By clicking-on the Codes button in the menu on the left and selecting one of the items, it will
be possible to view the "User menu access" subsection in the "Programming" section.
The selection field will be displayed on the system keypads immediately after user code
validation:
• Icons, function key shortcuts - displays the icons of the codes corresponding to the
function keys. At this point, the user can press the function keys and activate the
respective shortcut.
• Shortcut text - displays the descriptions of the user shortcuts associated with the function
keys. The descriptions of the shortcuts will be shown in the place of the respective
shortcuts icons.
• Standard user menu - accesses the user-menu scroll list containing all the operations the
user is enabled to perform. At this point, the user can scroll the list and select the required
operation.
Type-in Code (Installer) , PROGRAMMING Codes, "code", Options
This section provides the "Text Menu" and "User Menu" options.
The combination of these two options allows immediate display on the keypad screens
immediately after user code validation. Refer to the following table.
Table 9-1: Combinations "text menu" and "user menu"
Case
Text menu
A
Disabled
B
Disabled
C
Enabled
D
Enabled
In all methods of access (A, B and C), the
successive cases, see the figure opposite.
User code parameters
This is an editable programming field for the code
Description
user's name.
Section for the selection of the partitions the code is
Partitions
assigned to.
Programming field for the assignment of the level in
the code hierarchy of the selected user.
Type
The default level of code number 1 is "Master"; the
default level of all the other codes is "User".
Programming user codes
User menu
Accesses the standard user-menu (shown as a list
of operations the user is enabled to perform); at
this point the user can scroll the list using keys
Enabled
and
Display of the user-icons associated with function
keys
Disabled
press the required function key and activate the
Shows the descriptions of the personalized user-
icons associated with function keys. The shortcut
descriptions will be shown instead of the shortcut
Disabled
icons, at this point the user can use
to scroll the list of shortcut descriptions
and select the shortcut, which can be activated by
Enabled
key allows you to access/view the other
Table 9-2: Single code parameters
Parameter
Description
and select the required opera-
tion.
, ...,
; at this point the user can
associated shortcut.
means of the key.
The same as "C"
Software section
Codes, selected
code
Codes, selected
code, Options
9-2
Via software
Via keypad
A
User Code
Manage alarms
Arm/Disarm op.
Voice functions
B
User Code
and
C
User Code
Stop alarms
Delete memory
Nexus status
9-3
Installer menu section
Codes, "code"
47
Advertisement
Table of Contents
