Table of Contents
Advertisement
Programming manual
Sounder/flashers
Setting up sounder/flashers
Once the solution of the installation to be designed has been opened, access the "System
layout" section on the right. Here you can select the sounder/flasher to be configured and add
it to the configuration by double-clicking on the mouse.
In the section on the left, you can increase the number in correspondence to the sounder/
flashers button.
To remove a sounder/flasher from the structure, access the programming section by clicking
on the corresponding key in the menu on the left then, from the list displayed, click on the
Delete button that corresponds to the line of the sounder/flasher to be deleted.
Type-in Code (Installer PIN) , PROGRAMMING Sounder/flashers, Enablements
This section allows you to add/remove sounder/flashers from the configuration, by means of
keys
and
.
The Prime system provides wizards for the enrolling of wireless sounder/flashers.
Click-on the Sounder/flashers button on the menu on the left then, from the "Programming
- Configured Sounder/flashers" section, select the Sounder/flasher that is to be configured as
"Wireless" by means of the appropriate check box. This operation makes visible:
• the Enroll button, which allows the start of the enrollment procedure.
• the "Wireless monitoring" section
Pressing the Start button starts the monitoring process on the variation of the signal
transmitted by the device and background noise detected over time.
Type in Code (Installer), PROGRAMMING sounder/flashers, ChoosePeripheral "sounder/flash-
er", Wireless
Once the OK button is pressed, it is necessary to work through the menu options and enroll
the keypad.
Programming sounder/flashers
Programming of sounder/flashers as peripherals of the Prime system can be performed either
via software or from a keypad.
Click-on the Sounder/flashers button on the menu on the left, the "Programming" section
will provide two sections.
• Configured sounder/flashers, with a list of all the configured sounder/flashers. By
selecting one of these items it is possible to set the parameters of the single sounder/
flasher by clicking on the
• Sounder/flasher pattern, section with the programming parameters of the pattern types
(tones). 8 modifiable patterns are available.
Type in Code (Installer), PROGRAMMING Sounder/flashers, ChoosePeripheral
This section provides a list of the available sounder/flashers. From this list it is possible to
select a sounder/flasher for parameter programming.
Sounder/flasher parameters
Description string of the sounder/flasher
Description
(customizable by the installer).
Button to open a window containing a list of the
Events
events which activate the sounder/flasher.
Check box for the assignment of the "Wireless"
Wireless
attribute to the selected sounder/flasher.
Programming peripherals
button.
Table 3-7: Parameters for single sounder/flasher
Parameter
Software section
Installer menu section
Configured sounder/
Sounders, ChoosePeriph-
flasher, selected
eral, "sounder/flasher"
sounder/flasher
3-4
3-4-1
Via software
Via keypad
WIRELESS
SOUNDER/
FLASHER
Via software
Via keypad
3-4-2
Via software
Via keypad
3-4-3
17
Advertisement
Table of Contents
