Table of Contents
Advertisement
Programming manual
Timer parameters
Description
This is an editable field for the description of the timer.
You can set two "ON" and "OFF" time frames for each
day of the week.
During the week, the timer will activate in accordance
Monday / ... /
with each "ON" indication and deactivate in
Sunday
accordance with each "OFF" indication, regardless of
the number of times "ON" and "OFF" indications occur
and also regardless of whether the indications belong
to the same day of the week.
This section indicates the partitions associated with
Partition filter
the codes and keypads which have access to timer
for user-codes
programming through the user menu.
Each exception allows you to define a time frame,
expressed in days, within which you can set an "ON"
time and an "OFF" (deactivation) time valid for all the
Exceptions
days included in the time frame.
Exceptions always have priority over the days of the
week.
A key is provided that directly accesses the
Timer event
programming section of the activation event of the
selected timer.
It is also possible to program only timer activation or only restoral.
If you do not wish to program the timer activation or restoral setting, enter "--:--" in the field you do not
wish to program.
Programming timers
Table 8-1: Single timer parameters
Parameter
Software section
Installer menu section
Not available
Timer, selected
timer
Timers, "timer"
Not available
Events, Activated tim-
er
8-1
Note
45
Advertisement
Table of Contents
