Table of Contents
Advertisement
Programming manual
Programming arming scenarios
The programming of the arming scenarios (configurations of the arming mode of the Prime
system partitions) can be carried out either via software or from a keypad.
Click-on the Arming scenarios button on the menu on the left, the "Programming" section
will show a list of all the available scenarios and their parameters. Selecting one of these
items allows you to set the parameters of the single scenario by clicking on the
Type-in Code (Installer), PROGRAMMING Arming Scenarios
This section allows you to program the various options of the selected scenario.
Scenario parameters
Description
Editable field for the description of the scenario.
This section allows you to select the icon you wish to
Icon
assign to the scenario, by indicating the icon number
(refer to Chapter 15 Keypad shortcut and icon):
The selected output will be activated when the
scenario is applied (via keypad, reader, phone, etc.).
It is possible to use a scenario solely to activate an
Output
output (leaving all actions on the areas null) thus
having the possibility to display different icons on the
keypads to activate different outputs, inheriting the
desired icon from the scenarios.
This section allows you to configure the arm/disarm
scenarios of all the partitions managed by the control
panel.
•
"-" the current operating mode of the partition will
not be changed.
•
Away - the partition will arm in Away mode
Partitions
(interior and perimeter).
•
Stay - the partition will arm in Stay mode
(perimeter only).
•
Instant - the partition will arm in Instant mode
(perimeter only with zero delay).
•
Disarm - the partition will disarm.
At the bottom of the section is a key that directly
Activate sce-
accesses the programming section of the event that
nario
applies the selected scenario.
Programming arming scenarios
Table 7-1: Parameters of single scenario
Parameter
button.
Software section
Installer menu section
Arming scenario,
selected scenario
ArmingScenario, "sce-
nario"
Events, ScenarioON
7
Chapter
Via software
Via keypad
7-1
43
Advertisement
Table of Contents
