Table of Contents
Advertisement
18
Chapter
Via keypad
ACTIVATIONS
VIEW
76
User functions for the installer
The installer menu on the keypad contains a section that provides the installer with the
functions shared with the user.
1. Access the "User Functions" section of the installer menu:
Type-in Code (Installer) , PROGRAMMING User functions
The options available are:
• Activations
• View
• Outputs ON/OFF
• Set date/time
2. Use keys
and
This section provides information regarding the "Cloud registration" option which allows the
Prime control panel to access INIM Electronics cloud service.
• Events log - allows you to view all the events saved to the log.
• Alarms log - allows you to view all the events relating to zone/partition alarm and tamper
saved to the log.
• Faults log - allows you to view all the fault events saved to the log.
• Arm/Disarm ops. - allows you to view all the arm/disarm operations saved to the log.
• Nexus status - allows you to view (on the display) the following parameters of the Nexus
device:
Table 18-1: View Nexus status on the keypad
Line
Display
1
TELECOM
2
GSM signal
3
Credit
4
Low signal
• System voltage - allows you to view the voltage:
-
measured on the battery
-
power-supply of the control panel
-
measured on terminal "AUX x"
-
measured on terminal "+" of the I-BUS
to select the required function then press OK.
•
Mobile network provider (on the left side)
•
if "--" appears, it means that the Nexus is connected to the
BUS
•
the letter "C" indicates that data transfer is ongoing
C G
•
network technology data (on the left side)
G, GPRS service
3G, UMTS service
H, HSPA service
GSM signal reception (value between 1 and 100)
01
Remaining credit balance at the last operation (expressed in
11
the local currency)
Faults present, if present it will be necessary to access the
"View-Faults" section for details.
Centrali anti-intrusione
View
User functions for the installer
Advertisement
Table of Contents
