INIM Electronics Prime Programming Manual page 100

F
Appendix
Name
Zone alarm
Zone alarm
Terminal tamper
Terminal tamper
Partition alarm
Partition alarm
Alarm partition armed
StayPartit.alarm
in Stay mode
Partition tamper
Partition tamper
Zone bypass
Zone bypass
Real time zone
Real-time zone
Partition not-ready-to-
Partit.not ready
arm
Away arming request
Away arm request
on partition
Stay arming request
Overtime request
on partition
Effective arming mode
Partit.AwayArmed
on partition
Partition armed in
Partit.StayArmed
Away mode
armed
Disarm partition
Disarm partition
Reset partition memo-
Partition reset
ries
Partition exit time
Exit time
Partition entry time
Entry time
Partition pre-arm time
Pre-arm time
Overtime request on
Overtime request
partition
Partition bell
Chime
Forced arming on par-
Forced arming
tition
Partition failed to arm
Failed to arm
Recognized valid user
Valid code
code
Valid key
Valid key
100
Event type
Occurs when...
A zone generates an alarm
A terminal detects tamper (short-circuit
or wire cutting)
A 24h zone which belongs to the partition
generates an alarm, or a zone which
belongs to the partition generates an
alarm during Away mode.
A zone which belongs to a partition armed
in Stay or Instant mode, generates an
alarm.
A zone which belongs to the partition
detects tamper (short-circuit or wire cut-
ting).
A zone is inhibited
The electrical status of a zone switches
from stand-by to alarm
The event is independent of the zone type and the armed/disarmed status
of the partitions.
A zone which belongs to the partition is
not in stand-by status.
A request is made to arm the interior and
perimeter zones of the partition
A request is made to arm the partition in
Stay mode (perimeter zones only) or in
Instant mode
The partition interior and perimeter zones
have been armed effectively
The partition has been armed effectively
in Stay or Instant mode
The partition will be disarmed
A request is made to reset the partition
The partition exit time starts running
The partition entry time is running
The partition Pre-arm time is running
A request for overtime relating to the par-
tition is made
A chime zone belonging to the partition is
violated
At the time of an arming command, relat-
ing to one or more partitions, there are
open zones on the partition/partitions
involved, or there are other conditions
present which lower system security,
nonetheless, the user arms the system.
If partition arming is requested whilst:
there is at least one open/violated zone
and the option "NoArm.ZonesOpen" is
enabled
or
when one or more of the events
described in "LossTamp.ongoing" is pres-
ent (refer to "FaultForNotReady", para-
graph 4-5 Compliance 50131 grade 3).
A user-code PIN entered at a keypad is
recognized as valid
A key used at a reader is recognized as
valid on the reader
Restores when ...
A zone restores
A terminal restores
All the zones belonging to the
partition restore (reset).
All the zones belonging to the
partition restore (reset).
All the zones belonging to the
partition restore (reset).
A zone is enabled (switched On)
The electrical status of a zone
switches from alarm to stand-by One event for each
All the zones belonging to the
partition are in standby status.
A request is made to disarm the
partition
A request is made to disarm the
partition
The partition will be disarmed
The partition will be disarmed
The partition will be armed
The partition exit time expires
The partition entry time expires
The partition Pre-arm time
expires
Centrali anti-intrusione
Pulse
Number of events
events
One event for each
no
zone
One event for each
no
terminal
One event for each
no
partition
One event for each
no
partition
One event for each
no
partition
One event for each
no
zone
no
zone
One event for each
no
partition
One event for each
Yes
partition
One event for each
Yes
partition
One event for each
no
partition
One event for each
no
partition
One event for each
no
partition
One event for each
Yes
partition
One event for each
no
partition
One event for each
no
partition
One event for each
no
partition
One event for each
Yes
partition
One event for each
Yes
partition
One event for each
Yes
partition
One event for each
Yes
partition
One event for each
Yes
code
One event for each
Yes
key
Event type