Specifications Of Input/Output Signals With Plc Cpu; List Of Input/Output Signals With Plc Cpu - Mitsubishi Electric MELSEC-Q Series User Manual

Hide thumbs Also See for MELSEC-Q Series:

Table of Contents

3.3 Specifications of input/output signals with PLC CPU

Signal direction: Simple Motion module

[Y2 to YF] and [X2 to XE] are used by the system, and cannot be used by the user.

If these devices are used, the operation of the Simple Motion module will not be guaranteed.

The Simple Motion module uses 32 input points and 32 output points for exchanging

data with the PLC CPU.

The input/output signals when the head I/O number of Simple Motion module is set to

"0H" are shown below.

If it is set to other than "0H", change the I/O number according to setting of head I/O

Device X refers to the signals input from the Simple Motion module to the PLC CPU,

and device Y refers to the signals output from the PLC CPU to the Simple Motion

Synchronization flag

Use prohibited

Module READY

PLC CPU Signal direction: PLC CPU

Chapter 3 Specifications and Functions

Simple Motion module

All axis servo ON

Use prohibited

Positioning start