Mitsubishi Electric MELSEC-Q Series User Manual page 813

Hide thumbs Also See for MELSEC-Q Series:

Table of Contents

The following shows the relation between the buffer memory addresses of servo

parameter and the various items.

(Note): The setting range is different depending on the servo amplifier model. Refer to

each servo amplifier instruction manual for details.

Buffer memory address

The following shows the relation between the buffer memory addresses for mark

detection function and the various items.

(Note): Do not use the buffer memory address that not been described here for a

"Maker setting".

Buffer memory address

[Pr.101] Virtual servo amplifier setting

[Pr.800] Mark detection signal setting

[Pr.801] Mark detection signal compensation time

[Pr.802] Mark detection data type

[Pr.803] Mark detection data axis No.

[Pr.804] Mark detection data buffer memory No.

[Pr.805] Latch data range upper limit value

[Pr.806] Latch data range lower limit value

[Pr.807] Mark detection mode setting

[Cd.800] Number of mark detection clear request

[Cd.801] Mark detection invalid flag

[Md.800] Number of mark detection

[Md.801] Mark detection data storage area (1 to 32)

Appendix - 13

k: Mark detection setting No.-1

Servo parameters

n: Axis No.-1

control data