Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
3.15.2
Remove and install air filter element, 1.0
l TSI engines
Removing
– Release the spring clip -1- and pull air guide hose -2- off.
– Unclip vacuum line -1- from the air filter housing and loosen
spring clip -2-.
– Carefully pull off the air filter housing from the inlet connection
of the turbocharger.
– Detach hose for crankcase ventilation -1-.
– Unscrew screws -2- and raise air filter housing slightly.
Note
Vacuum lines are attached to the bottom part of the air filter!
– Detach the vacuum lines from the bottom part of the air filter.
94