Skoda FABIA II 2007 Workshop Manual page 1105

– Place the straightedge - T40100- upright on the flange of the
clutch housing.
Caution
The straightedge - T40100- must remain in this position during
the following measurements.
Do not turn or remove it.
– Place the digital depth gauge -A- on the outer drive shaft -B-.
– Perform null balance of the depth gauge .
– Measure the distance to the circlip.
– Note the result and name it B 1 .
Example: B 1 = 2.91 mm
– Measure the dimension B once more at the opposite point.
– Note the result and name it B 2 .
• Do not measure on the joint of the ring. The ring could be
pressed off from the joint and thus the measuring result will be
inaccurate.
– Remove circlip again.
• This ring must not be re-used!
– Determine the mean value from both measurement results.
Example:
Dimension B = B 1 + B 2 2 = 2.91+3.02 = 2.96
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
43
1. Clutch operation