INVT Goodrive300-01A Series Operation Manual page 52

Goodrive300-01A series VFD for air compressor
P07 group HMI
Function
Name
code
P07.00 User password
Function parameter
P07.01
Function selection of
P07.02
the QUICK/JOG key
Temperature of rectifier
P07.11
bridge module
Temperature of
P07.12
inverter module
Software version of
P07.13
control board
Accumulated running
P07.14
0–65535
0: No operation
1: Uploading function parameters from the
machine to keypad
2: Downloading function parameters
(including the motor parameters) from the
keypad to machine
3: Downloading function parameters
(excluding motor parameters of the P02 and
copy P12 groups) from the keypad to machine
4: Downloading function parameters (only
motor parameters of the P02 and P12 groups)
from the keypad to machine
Note:
After the parameter is set to 1, 2, 3 or 4, and
the operation is executed, the parameter is
automatically restored to 0.
0: No function
1: Jogging
2: Switching display status through the shifting
key
3: Forward/reverse running switching
4: Clearing the setting of UP/DOWN
5: Coasting to stop
6: Switching running-command giving
methods in sequence
7: Quick debugging mode (non factory
parameter debugging)
0–100.0° C
0–100.0° C
1.00–655.35
0–65535h
time
Description
-47-
Function code description
Default Modify
○
0
◎
0
◎
1
●
●
●
●